They do not even get MAC addresses of each other in their ARP tables. Vlan11-lan and vlan22-guest do not work correctly: Every host in 192.168.9.0/24 network is pinging each other. We are waiting and we hope that: they will fix it remove restrictions will add the ability to run scripts when the interface state changes.Vlan1 is working perfectly. So it should work, but in practice requests are not sent to. Change the address of the check, or intervals can not be. Rechecking every minute, after 3 unsuccessful attempts, the interface returns to wan status. * Internet Interface List - a list of interfaces with the status of wan if …0000 is accessible from them. In addition to everything, mikrotik will add to the dhcp client interface in attempts to get settings automatically. Also, interfaces with the status of lan which do not have dhcp server and with which the address 8.8.8.8 is available. * WAN Interface List - a list to which all lte and vpn interfaces are added. * LAN Interface List - a list to which all active layer2 interfaces are added. * Detect Interface List - a list with interfaces on which checks will be made. The functionality appeared in the current firmware version and is not yet ready for use. A fifth region has been added and you add it with your hands to the interface list, or you can do it easier and in the vpn profile specify which list the interface will be placed on when you connect, regardless of whether there is a binding for it or it is created automatically when the client disconnects the interface from the list deleted. For example, if you need to tag all incoming traffic from interfaces for queue tree. Including in combination with masquerade. Substitutes the specified ip only for the interface on which this ip is present. Depending on the output interface, substitutes the corresponding ip. There are not enough addresses for the same scheme. When the interface lists just appeared, on the mikrotik forum they complained about the work of the interface lists in nat, now they seem to fix it. Include - include interfaces from the specified list in the new listĮxclude - interfaces from the specified list are excluded from the new list With the first two everything is clear, dynamic is currently filled in from certain ppp connections and Detect Internet. > -> īy default, there are three lists: all, none, dynamic. The main thing to remember is that the interfaces in the lists continue to be independent, traffic will not start going through them (as in the case of the bridge) and will not is parallelized (as is the case with bounding), here you find it funny, but there are clever people. This functionality appeared about a year ago and is present in all current (current and bugfix) releases of RouterOS 6. Not to be confused with bridges (bridge) and bounding interfaces, these are three different technologies for different tasks. What is this is clear from the name - Interfaces List, the same as address lists (address list), only with interfaces. Interface lists have appeared in MikroTik RouterOS for quite some time, but by observation, not everyone knows about them and therefore does not use them.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |